En

EVDCF series 360kW Split-type DC charging pile with six terminal sets

[ Time:2019-08-01]
  • Product Details
  • Instruction Manual
   EVDCF series 360kW Split-type DC charging pile with six terminal sets adopts floor model design which looks simple and elegant and with stable frame layout. It is with complete protecting functions such as protection for emergency stop, protection for over/under voltage, production for overcurrent, protection for insulation failure, protection for battery reversal and other protection mechanism.  Six terminal sets are designed independently without interference, it can be applied for city bus charging stations, highway service areas, public parking lots, and other charging places that request for large power charging.  The terminal set output power can be automatically adjusted according to vehicle load, which the power output to be 60kW to 120kW. It is an efficient DC charging device that provides power supply for new energy vehicles that with on-board chargers or with DC charging port met the national standards.

EVDCF series 360kW Split-type DC charging pile with six terminal sets
 AC input voltage 380Vac±15%
AC input current ≤545A
AC power frequency 50±5Hz
Input power factor >0.99
Maximum output power 60kW-120kW
 DC output voltage 200~750V
 DC output current ≤240A
Transfer efficiency (Full load) ≥95.5%
 Charing mode Auto-full charge、 Time mode、 Amperage mode、 Amount mode、 Appointment mode
Display 7.0 inch highlight touch panel
 Charging way Password to start、Plug and charge、Credit to start、 Scan QR code to start
Working temperature permission -20℃~ +50℃
 Cooling way Force-air cooling
 Relative humidity permission 0~95%(non- condensation)
 Maximum altitude permission 2000M
Noise level  ≤80dB
 Auxiliary power supply (APS) 12V/24V Switchable
 IP grade IP54
Stand-by power consumption  ≤240W
 Size of the host(mm) 1700 X 800 X 550
Weight of the host(kg) ≤350KG
Size of the terminal(mm) 1450 X 350 X 200
Weight of the terminal(kG) ≤40KG